Appendix E - Technical Specifications - Axis 2100 User Manual
Network camera
Hide thumbs
Also See for 2100:
- User manual (68 pages) ,
- Product manual (6 pages) ,
- Installation manual (6 pages)
Table of Contents
Advertisement
Technical Specifications
54
Appendix E - Technical Specifications
System Requirements -
Mac and several others. Microsoft Internet Explorer 4.x, or higher (used with Axis' ActiveX
component AXIS Camera Control), or Netscape 4.x or higher.
Network Connection -
modem.
Networking -
NTP, ARP and BOOTP.
I/O Connector -
programmable digital input/output for remote image storage via FTP or SMTP, pre/post alarm
image storage.
Image Updating -
Pre/Post Alarm Buffer -
Modem Connector -
Operating Conditions: -
Approvals -
EMC: FCC Class A,
Safety: EN 60950, UL, CSA.
Metrics: -
Height: 1.6" (4.3 cm), Width: 4.0" (10.2 cm), Length: 5.8" (14.7 cm), Weight: 0.55
lb. (0.25 kg) excluding power supply.
Hardware -
ARTPEC-1 compression chip; ETRAX-100, including, 32 bit RISC, 100 MIPS
CPU, 8 MB RAM, 2 MB FLASH PROM.
Power -
External power supply 12V AC, 9.6 VA (PS-D, included), 9-15V AC, min. 10VA, or
9-15V DC, min. 7W.
TCP/IP on Windows 95, 98, NT and 2000, as well as Linux, UNIX,
RJ45 twisted pair cable, or remote connection using any standard serial
10baseT Ethernet or 100baseTX Fast Ethernet, TCP/IP, HTTP, FTP, SMTP,
1 optical-isolated alarm input. 1 digital output (max 24V, 100mA) with
Up to 10 frames/second over 10Mbps or 100Mbps networks.
Up to 500kB memory available for pre/post alarm image storage.
Single 9-pin D-SUB RS-232 connector, max 115 kbps, half duplex
Temp: 40
o
o
o
to 105
F (+5
to +40
EN 55022/1994, EN55024/1998
AXIS 2100 User's Guide
o
C), Humidity: 20-80% RHG.
Advertisement
Table of Contents
