Verifying The Installation From Your Browser - Axis 2100 User Manual

Network camera

Hide thumbs Also See for 2100:

Table of Contents

Installing Your Camera on a Network

Verifying the Installation From Your Browser...

Having completed the installation procedure above, you should then verify the connection

between the AXIS 2100 and the network as follows:

1. Start your Web browser (see note below) and enter the name or IP address of your camera in

the Location/Address field:

Example:

http://172.21.1.200/

The Home Page for your AXIS 2100 is now displayed:

Important!

To enable the updating of images in Microsoft Internet Explorer, you set your browser to allow ActiveX

controls and perform a once-only installation of Axis' ActiveX component onto your workstation. How-

ever, if your computer environment restricts or prohibits the installation of additional software compo-

nents, you can alternatively set your AXIS 2100 to use a Java applet for updating the images. This is done

from Image settings.

2. Continue the setup process and configure your own application using the Installation Wizard

or Administration Tools, as described in Configuring Your Camera, on page 38.

AXIS 2100 User's Guide

Table of Contents