Alternative Methods Of Assigning The Ip Address - Axis 2100 User Manual

AXIS 2100 User's Guide
Important!
When accessing the Administrator Tools for the first time during a browser session, you will not be
prompted for your username and password. You will be assumed to be the Administrator and will be
automatically logged on as such, using the username root and the default password pass. This root pass-
word must, however, be changed as soon as possible, to enable the security function. Furthermore, all
Axis products are shipped with the same password as default. For further information, refer to System
Security, on page 39.

Alternative Methods of Assigning the IP Address

In addition to the ARP command described earlier, you can set the IP address using an appropriate
method for your operating system from the table below:
Important!
Ethernet Address: The AXIS 2100 is pre-configured with a unique Ethernet Address based upon the
serial number printed on the label on the underside of the unit; where the serial number typically fol-
lows the format 00-40-8c-xx-yy-zz. You must know the Ethernet address to complete the installation.
Method
AXIS IP Installer
BOOTP
Requiring a BOOTP daemon on your system, this
method operates over the entire network. A
request to an active daemon initiates a search of
the boot table to find an entry matching the unit's
Ethernet address. The daemon downloads the IP
address to the device if a match is found.
Installing Your Camera on a Network
Operating Systems
Windows 95/98 and
NT/2000
UNIX
Refer to...
Using the AXIS IP Installer, on page 24.
Using BOOTP in UNIX, on page 25.
23