Technical Specifications; Led Indicators; Connectors And Buttons - Axis Q1932-E User Manual

AXIS Q1932–E Thermal Network Camera

Technical specifications

Technical specifications
You can find the latest version of the datasheet at www.axis.com

LED Indicators

Status LED
Unlit
Green
Amber
Amber/Red
Red

Connectors and Buttons

Network connector
RJ45 Ethernet connector with Power over Ethernet (PoE).
NO NOTICE NO TICE TICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer's
instructions. For information about regulatory requirements, see Electromagnetic compatibility (EMC) on page 2 .
I/O and audio connector
Terminal connector for connecting external equipment:
• Audio equipment
• Input/Output (I/O) devices
When connecting external equipment, an Axis multicable is required in order to maintain the product's IP rating. For more
information, see Multicable connectors on page 55.
Power connector
Terminal connector for connecting AC/DC power supply.
SD card slot
NO NOTICE NO TICE TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Disconnect power or
unmount the SD card from the Axis product's webpages before removal.
This product supports microSD/microSDHC/microSDXC cards (not included).
For SD card recommendations, see www.axis.com
Indication
Connection and normal operation.
Connection and normal operation.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Flashes amber/red if network connection is unavailable or lost.
Firmware upgrade failure.
54