Axis 2100 User Manual page 23

AXIS 2100 User's Guide
Connect an Ethernet cable
Connect an Ethernet cable to your AXIS 2100 and
attach it to the network.
Attach the external Power Supply
Attach the external Power Supply to the unit
and connect it to your local mains supply.
Wait for ARP reply and check Network indicator
Approximately 10-15 seconds after connecting the power supply,
t he message '
Reply from 172.21.1.200...
returned in the window. Ensure that the Power Indicator is
permanently lit and that the Network Indicator flashes
intermittently.
Exit ping and check the installation
The installation is now complete, and you are ready to access the
AXIS 2100 from your Web browser, as described in the next section...
Installing Your Camera on a Network
' - or similar, is
Network Indicator
Power Indicator
21