How To Use The Table Stand; The Reset Button; Getting Started - Oregon Scientific RMR132 User Manual

HOW TO USE THE TABLE STAND

OR WALL MOUNTING
The main unit has a removable table stand, which when connected,
can support the unit on a flat surface. Or you can remove the stand
and mount the unit on a wall using the recessed screw hole.
As for the remote unit, it comes with a wall-mount holder and a
removable stand. Use either to hold the unit in place.
Main unit
Wall-mount
NE L
CH AN
M A X
M A X
NE L
CH AN
RY
ME MO
/ MO DE
SE T
/
OF F
24 hr
Table Stand
5
Remote unit
Wall-mount

THE RESET BUTTON

This button is only used when the unit is operating in an unfavorable
way or malfunctioning. Use a blunt stylus to hold down the button.
All settings will return to their default values.

GETTING STARTED

Once batteries are in place for the remote units, they will start
transmitting temperature readings at 30-second intervals.
The main unit will also start searching for signals for about a minute
once batteries are installed. Upon successful reception, the
individual channel temperatures will be displayed on the top line
and the indoors temperature on the bottom line. The main unit will
automatically update its readings at about 30-second intervals.
Table Stand