Servicing
Remove the condensate collector (see fig. 130,
pos. 1).
Dismantle the tension spring between the supply
pipe and the heat exchanger (see fig. 131, pos. 1).
Pull the supply pipe out of the heat exchanger
(see fig. 132, pos. 1).
WARNING!
Water will be released.
We reserve the right to make any changes due to technical modifications!
Installation and Servicing Instructions Logamax plus GB142-24/30/45/60 • Version 12/2004
1
Fig. 130 Removing the condensate collector
Fig. 131 Loosening the backflow connection and dismantling
the tension spring
1
2
Fig. 132 Removing the supply pipe
Buderus Hydronic Systems • http://www.buderus.net
14
1
1
83