Installation; Requirements For The Installation Room; Fitting The Appliance - Buderus Logamax plus GB142-24 Installation And Servicing Instructions

6

Installation

6 Installation
6.1 Requirements for the installation
room
DANGER
– Install the heating system in a frost-free
room.
– Do not store any flammable materials or
liquids in the immediate vicinity of the
appliance.
– Never use any chlorinated detergents or
halogenated hydrocarbons (e. g. in
spraycans, solvents and detergents, paints,
adhesives).
– Do not allow too much dust to collect on the
appliance.
6.2

Fitting the appliance

Observe the installation distances of the combustion
air/flue gas system.
NOTICE
– To protect the connection orifice you must
not remove the styropor bottom panel.
– Do not lift the appliance by the drawer.
– Do not remove the transport safety clamps
(see fig. 6) from the drawer at this time.
– Protect the appliance and the combustion
air/flue gas orifice against pollution during
installation.
Remove the packaging materials and dispose of
them.
Use the mounting template to mark the drill holes.
Install the wall bracket taking into account the neces-
sary service clearances.
Remove the transport safety clamps (fig. 6) taking
into account the necessary service clearances.
We reserve the right to make any changes due to technical modifications!
12
Installation and Servicing Instructions Logamax plus GB142-24/30/45/60 • Version 12/2004
Fig. 6 Removing the transport safety clamps
Buderus Hydronic Systems • http://www.buderus.net