Playback - Samsung SDH-P4041 User Manual

PLAYBACK

Play
You can play data stored in the HDD and backup a desired portion of the data.
Using the mouse may help make setup easier.
1. In Live mode, click <Play> in the right-click menu or
< > in the launcher menu, or press the Play button on
the remote control.
2. Use the up/down button ( ) to select a menu.

For data search, refer to <Search>. (Page 72)
3. Select a data item and click <Play> in the Search menu.
The selected data is played and the play launcher appears
on the screen.

If there is an existing data, <Play> will start immediately without
performing the search.
Playback Information : Displays the date and time of the
current data in the top corner.
Backup : Click <
time of backup; you can specify a backup area using the
mouse (yellow triangle).
Click < > again to set the current time to the end time of
the backup and the "Backup Range" window appears.
- Type : Supports formats of DVR and SEC.
Refer to a list of formats in "Setting the Backup".
(Page 56)
- Device : Select a backup device.
- Check Capacity : Enables you to check the capacity of
the selected storage device.
4. If you want to return to the Live screen in Play mode, click <
[  ] button on the remote control.
> to set the current time to the start
2014-01-01 01:10:25
Scene Mode
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
2014-01-01 01:10:25
Backup Range
Start 2014-01-01 00:01:06 End 2014-01-01 01:10:25
Device USB-Storage Type
Folder \20140101\ Filename
Backup
Check capacity
Used
Free
OK Cancel
> in the launcher menu or press the
English _75
REC
SEC
0001
Change
:
:
: