Network Setting - Samsung SDH-P4041 User Manual

Network Setting

❒ Connection Mode (DHCP)
1.
Click on Network and select <Connection Mode>.
If there occur a problem with Connection Mode, check the connection
as "Installing your system" on page 1.
If you still have a problem, contact the nearest service center for more
information.
2.
Under <Interface> Tab.
Check <IP Type> is set to <DHCP> as default.
If it connected successfully, you can see the success comment.
J
If you know Static IP information from your router, please select
<Static> and enter IP address, Gateway, and Subnet Mask etc.

M
Please refer to the Router Guide in provided CD when you use a static IP.
3.
Under <Port> Tab.
J
Write down <Device Port> and <HTTP Port>.
1 IP Address
2 Device Port
4.
When completing the setting, click <OK>.
6_ English
3 HTTP Port
1
2
3