Setting The Device - Samsung SDH-P4041 User Manual

main menu

SETTING THE DEVICE

You can setup Camera, Storage Device, Remote Device and Monitor.
Camera
Setting the Camera
You can set Video, Audio, Channel Name and Dwell Time of a Camera.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control.
2. Use the left/right button (◄ ►) to select <Device>.
Device setting menu is selected.
3. Use the up/down buttons ( ) to move to <Camera>,
and press [ENTER] button.
4. Select <Camera>.
Displays settings window for Video, Audio, CH Name,
SEQ-Dwell Time, Screen Setup and Privacy Region.
5. Use direction buttons ( ◄ ►) to move to a desired item,
and set the value.
Video
- <ON/OFF> : You can turn ON/OFF the selected channel's
camera.
- <Covert1> : Shows information other than the video of
the selected channel.

For privacy protection, it does not display the video while the recording continues.
- <Covert2> : Shows nothing but an empty screen while the recording continues.

M
If the channel is set to <Covert1> or <Covert2> mode, the channel's sound is not hearable.
However, the channel's sound is recorded if its Audio setting is set to <1, 2, 3, 4>, even the sound is not heard in Live
mode.
Audio
- If set to <1, 2, 3, 4>, you can turn the audio of the channel ON/OFF on the Live screen.
- If set to <OFF>, the channel's audio is off on the Live screen and not recorded.

Audio output is available for only 1 channel.
42_ main menu
Logout
Device
Camera
Storage Device
Remote Device
Monitor
Camera
Camera
PTZ
CH Video Audio CH Name SEQ-Dwell Time
1 ON OFF CAM 01
2 ON OFF CAM 02
3 ON OFF CAM 03
4 ON OFF CAM 04
5 ON OFF CAM 05
6 ON OFF CAM 06
7 ON OFF CAM 07
8 ON OFF CAM 08
Previous/Next Page
Screen Setup Privacy Region
OK Cancel
Return
5 sec
5 sec
5 sec
5 sec
5 sec
5 sec
5 sec
5 sec