Samsung SDH-P4041 User Manual page 161

HD CAMERA
Part Names
Name
a
IR LED
b
Lens
c Illumination
Sensor
RJ-45 Cable (Length: 18.3m, 60ft)
This cable is specific to UTP connection, which is not compliant with the LAN cable. You can use the
UTP direct cable (all of 8 pins are used) to extend the length to a max of 100m.
- Maximum Transmission Length : 100m (UTP CAT5e, Solid Wire)
TRD3-
TRD3+
TRD1-
TRD2-
J

Do not plug any other cable except normal direct cable in the Camera UTP port.
Do not plug any other cable except the one connected with the Camera in the Camera HD UTP port.
2_ English
These infrared LED's are controlled by the illumination sensor.
You can monitor wider range.
Detects incoming light to control the IR LED.
50m (UTP CAT5e, Stranded Wire)

It is subject to change depending on user environment.
TRD0+
TRD0-
TRD1+
TRD2+
<Camera>
a
b
c
Description
Pin Name Data Name
1 TRD0+
2 TRD0-
3 TRD1+
4 TRD2+
5 TRD2-
6 TRD1-
7 TRD3+
8 TRD3-
<Cable pin information provided>
POE Power
+12V
+12V
GND
+12V
+12V
GND
GND
GND