Motion Detection; Setting The Event - Samsung SDH-P4041 User Manual

SETTING THE EVENT

You can set recording options for motion, and video loss event.

Motion Detection

You can set target detection region and motion, as well as the alarm signal output.
When the motion detection region is set, it detects motion within the area.
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control.
2. Use the left/right button (◄ ►) to select <Event>.
Event setting menu is selected.
3. Use the up/down buttons ( ) in <Event> window to
move to <Motion Detection>, and press [ENTER] button.
A window of motion detection area setup appears.
4. Use direction buttons ( ◄ ►) to move to a desired item,
and set the value.
Mode : Sets whether to activate motion detection.
Sensitivity : Sets the sensitivity level of the motion detection.
Alarm : Sets the alarm output method.
Alarm Duration : Sets the duration of alarm signal and alarm
sound.
5. When the motion detection setup is done, press <OK>.
Logout
Event
Motion Detection
Video Loss Detection
Tampering Detection
Alarm Schedule
Motion Detection
CH Mode Sensitivity Alarm
1 OFF Level10(High) None
2 OFF Level10(High) None
3 OFF Level10(High) None
4 OFF Level10(High) None
5 OFF Level10(High) None
6 OFF Level10(High) None
7 OFF Level10(High) None
8 OFF Level10(High) None
Previous/Next Page
OK Cancel
English _53
Return
Alarm Duration
10 sec
10 sec
10 sec
10 sec
10 sec
10 sec
10 sec
10 sec
Motion Region