Screen Setup - Samsung SDH-P4041 User Manual

main menu
Monitor
You can configure information to be displayed and its format for monitor.
Setting the Monitor
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Device> window to
move to <Monitor>, and press [ENTER] button.
2. Select <Monitor>.
3. Use direction buttons ( ◄ ►) to move to a desired item,
and set the value.
Event Display : Sets the dwell time of the event channel
display on the monitor when an event occurs.
If selected <Continuous>, it displays the channel until you
press [ALARM] button to release it.
Display : Displays only checked items on the monitor
screen.
Multi CH SEQ Time : Sets the interval between automatic display switching in 4-split and 9-split mode of
the Live screen.
VGA/HDMI : Set your preferred screen resolution to <VGA> or <HDMI>.
If the monitor does not support selected resolution of <VGA> or <HDMI>, it may not display video properly.
- Resolution : 1280 x 720, 1280 x 1024, 1920 x 1080
4. When the monitor setup is done, press <OK>.

Screen Setup

Some monitors many not display information (camera name, icon, time information, etc.) about the DVR,
depending on the condition. Then, you can change the display position of the data.
1. In the <Device> window, press the up/down ( ) button to move to <Monitor> and press the [ENTER]
button.
2. Select the <Monitor> item.
3. Select <Display Position Setup> in the bottom.
You will move to the <Display Position Setup> window.
4. Use the four direction buttons or the number buttons on
the remote control to adjust the data position.
48_ main menu
Monitor
Monitor
Mode
Event Display OFF
Display Date Time CH Name
Multi CH SEQ Time 5 sec
VGA/HDMI 1280X720
Display Position Setup
OK Cancel
2014-01-01 01:10:25
Display Position Setup
30
30 30
30
OK Cancel
Icon