Using Live Viewer (Mac) - Samsung SDH-P4041 User Manual

USING LIVE VIEWER (Mac)

The Live Viewer screen consists of following :
a
192.168.1.200 / SDR-5200
c
d
192.168.1.200 / SDR-5200
e
f
g
h
i
j
Menu
a
Name, Address
b
Menu Selection
c
Split Mode Selection
d
Address, Name
e
Audio
f
DVR Time, PC Time
g
Change Channel
Capture
Print
h
RECORD
i
Channel
j
PTZ
k
Display Pane
Displays a connected DVR's IP address and model name.
Consists of < Live > and < About > menu.
These buttons are used for the screen split and full screen mode.

Supports up to a maximum of 9 channels due to performance constraints of Silverlight
Displays a connected DVR's IP address and model name.
Sets the sound connected to each channel to ON/OFF.
Select < DVR Time > or < PC Time > for the OSD time information display setting of the Live
Viewer.
Switches into previous/next channel or perform Auto Sequence.
Click Auto Sequence button to display the Time Interval Selection menu.
Saves current video for selected channel in designated path.
Prints current video image for selected channel through designated printer.
Starts and stops recording.
If you cannot play the file recorded from the web, please install the H.264 CODEC.
ex) MAC: perian_1.2.3.dmg (http://perian.org)
Indicates connected DVR's channels.
Controls connect PTZ camera(s).
Displays the video of camera connected to DVR.
b
Functions
k
English _105