Meter Readings; Admin Menu - Fuji Xerox DocuPrint C1110 User Manual

Meter Readings

Displays the number of printed pages on the control panel. The meter is divided according
to the color modes.
Note
• For information on how to check the number of printed pages, refer to "7.3 Checking Printed Pages" (P.
139).
Item
Meter 1
Meter 2
Meter 3
Meter 4

Admin Menu

The [Admin Menu] menu consists of eight submenus on the DocuPrint C1110 and five
submenus on the DocuPrint C1110 B, respectively.
• DocuPrint C1110
• DocuPrint C1110 B : [System Settings], [Maintenance Mode], [PDF], [PCL],
Wired Network (DocuPrint C1110 only)
Specifies printer settings for jobs sent to the printer through a network port.
Note
• The settings in [Wired Network] cannot be set when entering this menu during printing.
• You must reboot the printer to activate the new settings. After making the settings, switch the printer off
and then on again.
Item
Ethernet
86
5 Control Panel Menus
Displays the total number of color prints.
Displays the total number of monochrome prints.
Displays the total number of large size color prints.
Displays the total of color and monochrome prints (Meter 1 + Meter 2).
: [Wired Network], [USB Settings], [System Settings],
[Maintenance Mode], [PDF], [PCL], [PostScript], [Panel Settings]
[Panel Settings]
Sets the communication speed and connector type for the Ethernet interface.
• [Auto] (default)
Automatically detects 10BASE-T (Half), 10BASE-T (Full), 100BASE-TX (Half), or
100BASE-TX (Full).
• [10BASE-T Half]
• [10BASE-T Full]
• [100BASE-TX Half]
• [100BASE-TX Full]
Description
Description