Table of Contents
Advertisement
Item
Toner Refresh
Drum Refresh
Print Meter
Initialize NVM
Storage Disk
PDF
Specifies the settings for PDF.
Item
Quantity
Print Mode
Password
Collated
Output Size
94
5 Control Panel Menus
Refreshes the toner cartridges by forcing to consume toner in the toner cartridges.
When the printed image is light, the toner cartridge refreshing may solve this printing
problem.
Refer to
• "Toner Cartridge Refreshing" (P. 168)
Reduces the light fatigue of the drum cartridge that is caused by exposure to light while
leaving the front cover open.
Refer to
• "Drum Cartridge Refreshing" (P. 169)
Initializes the meter counts.
Initializes the settings stored in the NVM except for the network settings. The NV
memory is nonvolatile memory that retains the settings of the printer even when its
power is switched off. After executing this function and restarting the printer, all the
menu options are reset to their default values.
Note
• You cannot execute this menu during printing.
• You need to restart the printer to activate this setting. After making the setting, switch
the printer off and then on again.
Clears the RAM disk (optional). Use this menu to delete all of the data in the RAM disk.
Note
• [Storage Disk] appears only when additional memory (optional) is installed.
Sets the print quantity.
• [1 Set (s)] to [999 Set (s)] (default: [1 Set (s)])
Note
• Depending on the protocol used for file transmission, the value specified on the
protocol may override the [Quantity] setting.
Sets the print mode to one of the followings:
• [Normal] (default)
Prints documents at standard speed with standard image quality.
• [High Quality]
Produces higher image quality than [Normal], but at a lower print speed.
• [High Speed]
Prints documents at a higher speed than [Normal].
Before printing a password-protected PDF, set the password here. The file will be
printed only if its password matches the password you set here.
The password can be up to 32 alphanumeric characters.
Sets whether to collate multiple-set documents. (1, 2, 3..., 1, 2, 3...)
• [Off] (default)
• [On]
Sets the output paper size.
• [Auto]
Automatically determines the output size based on the size and settings of your PDF
file.
• [A4] or [8.5 x 11"] (default)
Displays either [A4] or [8.5 x 11"] depending on the option selected under
[Admin Menu] > [System Settings] > [DefaultPaperSize].
Description
Description
Advertisement
Table of Contents
