How To Specify Print Options (Dpof); Dpof Set Frame - FujiFilm FinePix A203 Owner's Manual

i HOW TO SPECIFY PRINT OPTIONS ( DPOF )
PLAYBACK MENU
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
xD-Picture Card. The recorded specifications include information on which frames are to
be printed.
This section gives a detailed description of how to order your prints with the FinePix A203/
FinePix A303.
On the FinePix A203/FinePix A303, you can specify only one print per image in the DPOF
settings.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
©
ø
When you erase the image, the DPOF setting for that image is deleted at the same time.
¥
(➡P.70)
If you load a xD-Picture Card that contains frames specified for printing on another
camera, those print specifications are all reset and replaced by the new print specifications.
™
(➡P.116)
Up to 999 frames can be specified on the same xD-Picture Card.
66
(➡P.60)
i DPOF SET FRAME
PLAYBACK MENU
1
1 0
w
1Set the Mode dial to " ".
2Press the "MENU/OK" button to display the
menu screen.
2
2 0
ＤＰＯＦ ＤＰＯＦ
ＯＫ ＯＫ
ＤＡＴＥ ＯＦＦ ＤＡＴＥ ＯＦＦ
Use "d" or "c" to select " i " DPOF.
Continued over page...
4
67