Disconnecting From The Pc (Important - Always Use This Procedure.); How To Specify Print Options (Dpof); System Expansion Options - FujiFilm Finepix M603 Owner's Manual

DISCONNECTING FROM THE PC ( Important — always use this procedure. )
1
For a DSC connection, proceed to step
G
!
In some cases, the camera and computer may still be communicating even after the "Copying" message
disappears from the computer screen. Always check that the indicator lamp is lit green.
Perform the steps shown below before you switch the camera off. This procedure varies
2
depending on the operating system software (or PC) you are using.
Windows 98/98 SE
No PC operation is required. Go ahead to step
Windows Me/2000 Professional/XP
1 Right-click the removable disk icon in
the "My Computer" window and select
Eject. This step is only required in
Windows Me.
Macintosh
Drag the "Removable drive" icon on the desktop to the Trash.
Switch the camera off and disconnect the special USB cable.
3
74
1 Quit all applications (FinePixViewer, etc.) that
are using the camera.
2 Check that the indicator lamp is lit green (the
camera is not exchanging data with the
computer).
2
. For a PC CAMERA connection, proceed to step
3
.
2 Left-click the Eject icon in the taskbar
and eject "USB Disk".
✽ Windows Me screen
3 The menu option shown below appears.
Click on this option.
✽ Windows Me screen
4 The "Eject hardware" dialog box appears.
Click the [OK] button or the close button.
G
!
When you drag the icon to the Trash, "
appears on the camera's screen.
How to specify print options ( DPOF )
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such
as xD-Picture Card. The recorded specifications include information on which frames
are to be printed.
This section gives a detailed description of how to order your prints with the FinePix M603.
On the FinePix M603, you can specify only one print per image in the DPOF settings.
✽ Note that some printers do not support date and time imprinting or specification of
the number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the prints.
3
.
©
ø
When you erase the image, the DPOF setting for that image is deleted at the same time.
¥
If you load a media that contains frames specified for printing on another camera,
those print specifications are all reset and replaced by the new print specifications.
≈
Up to 999 frames can be specified on the same media.

System Expansion Options

eBy using the FinePix M603 together with other optional FUJIFILM products, your system can
be expanded to fill a wide range of uses.
FinePix M603
Digital Camera
≠ "
Video
output
TV monitor
( commercially available)
(➡P.47, 80)
(➡P.50, 81)
(➡P.81)
USB
Cradle
Image Memory Card Reader
(USB)
PC Card Adapter
xD-Picture Card
(PC card slot)
Image Memory Card Reader
(IEEE1394)
Microdrive
(commercially available)
PC Card Adapter
(PC card slot)
(commercially available)
Video output
Personal Computer
(commercially available)
Digital Photo Printer
CX-400
(USB)
75