Table of Contents
Advertisement
PRESET REMOTE CONTROL
POWER
~
Press AV POWER (or any other button) on the
remote control to check if you have set the
code correctly.
If the VCR cannot be controlled
with the lemote control, tly
setting another code for the
same manufacturel
Use the numeric buttons to
enter the four-digit code
for the second (and third)
VCR. Make sure that the
indicator flashes twice.
If the indicatol does not flash or
flashes lapidly several times,
1
epeat step 3 and re-entel the
code
•
To use a second (and third) VCR
You can contlOl a second (and third) VCR in the CBL/SAT
and DVD MENU positions if a cable TV or satellite tuner,
O! DVD playel is not being used
t
~A~
• If you want to contlOl a second (and thild) VCR in the DVD
MENU position, you must set the code fOl all I D playel in the
DVD/LD position
~
Set the selector dial to the
CBLlSAT or DVD MENU
position.
o
Turn on the VCR to be used.
!1
Press> (right) and
<
(left)
at the same time for about
four seconds.
The indicator flashes twice
POWER
~
t
~~~
o
(!)
TC:;D
®
~
Press AV POWER (or any other button) on the
remote control to check if you have set the
code correctly
If your component cannot be
conti oiled with the remote
contlOl, try setting anothel code
fO! the same manufactUlel
D
Use the numeric buttons to
enter the four-digit
manufacturer's code for
the component to be used
Make sure that the
indicator flashes twice.
If the indicator does not flash or
flashes rapidly sevelal times,
lepeat step 3 and le-entel the
code
!1
Press> (right) and
<
(left)
at the same time for about
four seconds
The indicator flashes twice
~
Set the selector dial to the
desired position for the
component (TAPE/MD, CD,
DVD/LD, etc ).
•
Setup codes
You can set the code for the manufactUler of YOUl
component in each position of the selector dial
o
Turn on your component to be used.
• You can set only one code fOl one position
• In the DVD/LD and DVD MENU positions:
Be SUie to set the selectoi dial to the DVD/LD position befolC
enteIing the code fOl the DVD/LD playel The code set in the
DVD/LD position is also simultaneously set in the DVD MENU
position You cannot set the code fOJ a DVD playel when the
selectOl dial is set to the DVD MENU position
• If yoU! component does not lespond to any of the codes listed fOl
the manufactU!el, use the oliginallemote contlOl supplied with
yoU! component
4R
PRESET REMOTE CONTROL
POWER
~
Press AV POWER (or any other button) on the
remote control to check if you have set the
code correctly.
If the VCR cannot be controlled
with the lemote control, tly
setting another code for the
same manufacturel
Use the numeric buttons to
enter the four-digit code
for the second (and third)
VCR. Make sure that the
indicator flashes twice.
If the indicatol does not flash or
flashes lapidly several times,
1
epeat step 3 and re-entel the
code
•
To use a second (and third) VCR
You can contlOl a second (and third) VCR in the CBL/SAT
and DVD MENU positions if a cable TV or satellite tuner,
O! DVD playel is not being used
t
~A~
• If you want to contlOl a second (and thild) VCR in the DVD
MENU position, you must set the code fOl all I D playel in the
DVD/LD position
~
Set the selector dial to the
CBLlSAT or DVD MENU
position.
o
Turn on the VCR to be used.
!1
Press> (right) and
<
(left)
at the same time for about
four seconds.
The indicator flashes twice
POWER
~
t
~~~
o
(!)
TC:;D
®
~
Press AV POWER (or any other button) on the
remote control to check if you have set the
code correctly
If your component cannot be
conti oiled with the remote
contlOl, try setting anothel code
fO! the same manufactUlel
D
Use the numeric buttons to
enter the four-digit
manufacturer's code for
the component to be used
Make sure that the
indicator flashes twice.
If the indicator does not flash or
flashes rapidly sevelal times,
lepeat step 3 and le-entel the
code
!1
Press> (right) and
<
(left)
at the same time for about
four seconds
The indicator flashes twice
~
Set the selector dial to the
desired position for the
component (TAPE/MD, CD,
DVD/LD, etc ).
•
Setup codes
You can set the code for the manufactUler of YOUl
component in each position of the selector dial
o
Turn on your component to be used.
• You can set only one code fOl one position
• In the DVD/LD and DVD MENU positions:
Be SUie to set the selectoi dial to the DVD/LD position befolC
enteIing the code fOl the DVD/LD playel The code set in the
DVD/LD position is also simultaneously set in the DVD MENU
position You cannot set the code fOJ a DVD playel when the
selectOl dial is set to the DVD MENU position
• If yoU! component does not lespond to any of the codes listed fOl
the manufactU!el, use the oliginallemote contlOl supplied with
yoU! component
4R
Advertisement
Table of Contents
