Yamaha HTR-5250 Owner's Manual page 30

Natural sound av receiver
Hide thumbs Also See for HTR-5250:
Table of Contents

Advertisement

DIGITAL SOUND FIELD PROCESSOR (DSP) EFFECT
Press EFFECT to cancel
the sound effect and
monitor only the main
sound.
Press EFFECT again to turn the
sound effect back on
wq
Front panel
or
~
Remote control
'"
~<il-:'
If the selectOl dial is set to a position other than the DSPITUN
position, first pless DSP and then EFFECT on the
I
emote contlOl
• If you tUi n off the sound effect when Dolby Digital
01
DTS is
decoding, the sounds of the center and leal channels ate mixed
and output from the main speakers
• If you tum off the sound effect when Dolby Digital
01
DTS is
decoding, it may happen that the sound is output faintly
01
not
output normally, depending on the SOUlce In this case, tUin sound
effect back on
DIGITAL SOUND FIELD PROCESSOR (DSP) EFFECT
Press EFFECT to cancel
the sound effect and
monitor only the main
sound.
Press EFFECT again to turn the
sound effect back on
wq
Front panel
or
~
Remote control
'"
~<il-:'
If the selectOl dial is set to a position other than the DSPITUN
position, first pless DSP and then EFFECT on the
I
emote contlOl
• If you tUi n off the sound effect when Dolby Digital
01
DTS is
decoding, the sounds of the center and leal channels ate mixed
and output from the main speakers
• If you tum off the sound effect when Dolby Digital
01
DTS is
decoding, it may happen that the sound is output faintly
01
not
output normally, depending on the SOUlce In this case, tUin sound
effect back on

Advertisement

Table of Contents
loading

Table of Contents