Table of Contents
Advertisement
HI-LIGHT DOUBLE ZONE and HI-LIGHT OVAL ZONES
The heating element is formed of a 2 coils of resistant material which reaches the work-
ing temperature quickly.
These zones are controlled by a continuous energy regulator switch (figs. 2.3a - 2.3b).
The heat intensity can be regulated continuously from "0" to "12" (max).
Check that the hob is clean and then switch on by turning the control knob.
When the hob is working, the pilot light
By switching on the second element (fig. 2.4), the surface area of the double and oval hi-
light zones can be extended.
For this purpose, turn the control knob (figs. 2.3a - 2.3b) fully to the right (position
Fig. 2.3a
Hi-light
double
zone
Fig. 2.4
8
will be on.
Fig. 2.3b
Second element
).
Hi-light
oval double
zone
Advertisement
Table of Contents
