Honeywell 4 HRDP Quick Start Manual

DIRECTIONAL AND PLAYBACK CONTROL BUTTONS
Operation Modes: Live Mode, Live Freeze Mode, Search Mode, Search-Pause Mode,
Navigation Mode, and PTZ Mode.
Live Go to PTZ mode.
PTZ Adjust zoom, focus, and iris on a PTZ channel.
Search Start reverse playback of recordings. Press successively to
change the fast reverse speed.
Live Start playback of the latest recordings.
(By default, the system searches recordings in the past 30
secs. If no recording is archived, the system will play back
the latest one.)
PTZ Adjust zoom, focus, and iris on a PTZ channel.
Search Start playback of recordings. Press successively to change
the fast forward speed.
Navigation Move up.
PTZ Move the camera view point up.
Navigation Move to the right.
PTZ Move the camera view point to the right.
Search Play recorded videos. When pressed successively, the
search jumps forward in time by 30 minute increments.
Search-Pause Step forward one frame.
Navigation Move down.
PTZ Move the camera view point down.
Navigation Move to the left.
PTZ
Move camera's view point to the left.
Search Play recorded videos in reverse. When pressed successively,
the search jumps back in time by 30 minute increments.
Search-Pause Step backwards.
Document 800-06867 - Rev D - 02/11
Live Press once to enter channel selection mode, press again to
open the camera popup menu.
Search Pause playback channels.
Search Pause Resume playback.
FUNCTION BUTTONS
SEARCH Open the search menu.
FOCUS In PTZ mode, press to use the Focus function.
Use the buttons to adjust.
BACKUP In live mode, press to open the backup menu.
In the search mode,
• Press once, to set the start time for Backup.
• Press twice, to set the end time and complete Backup.
ZOOM
In PTZ mode, press to use PTZ Zoom function.
Use the buttons to adjust.
ROTATE Rotate through to the remaining channels in the current display
mode or rotate the display configuration.
PRESET In PTZ mode, press to use the Preset function.
KEY Log out the current user. Use to prevent accidental or
unauthorized system-wide changes.
IRIS In PTZ mode, press to use the IRIS function.
Use the buttons to adjust.
LIVE Change the display mode. Display switches in the following order
when the LIVE key is pressed successively: (Single > 4 > 9 > 16 >
PiP > Single > 4 > 9 ...split screen mode)
SETUP Open the setup menu.
POWER Press and hold to shutdown or startup the DVR.
[4, 8, 16] HRDP H.264 Digital Video Recorder

QUICK START GUIDE

LOGGING IN FOR THE FIRST TIME
DVR User ID: admin Remote Software
Password: <none>
LED STATUS INDICATOR
Power Illuminates when power is supplied to the DVR.
HDD Flashes when the hard drive is being accessed.
Record Flashes when live video is recording.
Network Illuminates when the DVR is connected to a network.
HDD Illuminates when HDD temperature increases beyond the acceptable
Temp. range.
ENTER / EXIT BUTTONS
Enter Input data, make selections, and open pop-up menus.
Exit Return to the previous mode or menu, without saving.
NUMERIC BUTTONS AND REC
Numeric In live and search modes, press to watch that channel full screen.
Record
In live mode, press to start instant recording of all channels.
User ID: admin
Password: <none>