Disassembly Procedure - Yamaha MG16/6FX Service Manual

MG16/6FX
I

DISASSEMBLY PROCEDURE

1. Rack Mount Angle (Time required: About 1 minute)
1-1 Remove the two (2) screws marked [570A]. The rack
mount angle R can then be removed. (Fig. 1)
1-2 Remove the two (2) screws marked [570B]. The rack
mount angle L can then be removed. (Fig. 1)
2. Bottom Cover (Time required: About 3 minutes)
2-1 Remove the ten (10) screws marked [550] and the
four (4) screws marked [560]. The bottom cover can
then be removed. (Fig. 1)
• Right side view
[570A]
[570A]
14
• Rear view
[460B]
[490] [490]
• Bottom view
[560]
[550]
[460A]
[460]: Bind Head Tapping Screw-S
[490]: Bonding Tapping Screw-B
[550]: Bind Head Tapping Screw-S
[560]: Bind Head Tapping Screw-B
[570]: Bind Head Screw
[490]
[490]
[550]
[550]
[460C]
[550]
3.0X6 MFZN2B3 (WE877800)
3.0X10 MFZN2B3 (WE878000)
3.0X6 MFZN2B3 (WE877800)
3.0X8 MFZN2B3 (WE774400)
4.0X8 MFZN2B3 (WE969000)
Fig .1
[460D]
• Left side view
[570B]
[570B]