Yamaha MG16/6FX Service Manual page 18

MG16/6FX
7-12 Remove the two (2) screws marked [430]. Twist the
eight (8) hooks of the MIX1 support (upper) to
become straight, and the support and two (2) spacer
can be removed from the MAIN circuit board. (Fig. 2,
Photo. 10)
7-13 Remove the screw marked [440]. Twist the eight (8)
hooks of the MIX1 support (lower) to become
straight, and the support and spacer can be removed
from the MAIN circuit board. (Fig. 2)
7-14 Remove the meter cover from the meter reflector.
(Fig. 2)
18
[450]
MAIN
[450]: Bind Head Tapping Screw-S
[500]: Bind Head Tapping Screw-S
MIX1 support (upper): Hooks
Photo.10
[450]
3.0X6 MFZN2W3 (WE877900)
3.0X6 MFZN2W3 (WE877900)
Fig. 2
MAIN
JACK 2/2
JACK 1/2
[500]