Disassembly Procedure - Yamaha EMX62M Service Manual

EMX62M

DISASSEMBLY PROCEDURE

1. Front Panel Assembly
(Time required: about 3 min)
1-1. Remove the seven (7) screws marked [80] and the
screw marked [90]. (Fig.1)
1-2. Hold volume knobs and pull the panel to the front.
(Fig.1)
1-3. Remove the screw marked [100]. The front panel
assembly can then be removed. (Fig.1)
Front Panel Assembly
[80]
[80]: Bind Head Screw 4.0X12 MFZN2BL (VB132700)
[90]: Bind Head Screw 4.0X20 MFZN2BL (VB403600)
[100]: Bind Head Screw A4.0X8 MFZN2BL (VP156800)
2. MIX62 Circuit Board 1/2
(Time required: about 16 min)
2-1. Remove the front panel assembly. (See Procedure 1)
2-2. Remove the cable from the cord binder marked
[170]. (Fig.2)
14
Body Assembly
[90]
[170]
[170]: Cord Binder TS-0708 KSS (VZ765100)
[100]
[80]
(Fig. 1)
(Fig. 2)