Replacement Bulbs; Electrical System; High Voltage Devices And Wiring; Overload - Chevrolet Impala 2014 Owner's Manual

Hide thumbs Also See for Impala 2014:
Table of Contents

Advertisement

Replacement Bulbs

Exterior Lamp
Back-Up Lamp
Deck Lid Taillamp
Front Parking/Turn
Signal Lamp
Front
Sidemarker Lamp
High/Low-Beam
Headlamp (Base)
License Plate Lamp
Stoplamp/Taillamp/
Turn Signal Lamp
For replacement bulbs not listed
here, contact your dealer.

Electrical System

Bulb
High Voltage Devices and
Number
Wiring
7440
194
7444 NA
PLATINUM
Exposure to high voltage can
cause shock, burns, and even
194
death. The high voltage
components in the vehicle can
HIR
only be serviced by technicians
2 (9012)
with special training.
W5W LL
High voltage components are
identified by labels. Do not
7443 LL
remove, open, take apart,
or modify these components.
High voltage cable or wiring has
orange covering. Do not probe,
tamper with, cut, or modify high
voltage cable or wiring.
Warning
Vehicle Care
Electrical System

Overload

The vehicle has fuses and circuit
breakers to protect against an
electrical system overload.
When the current electrical load is
too heavy, the circuit breaker opens
and closes, protecting the circuit
until the current load returns to
normal or the problem is fixed. This
greatly reduces the chance of circuit
overload and fire caused by
electrical problems.
Fuses and circuit breakers protect
power devices in the vehicle.
Replace a bad fuse with a new one
of the identical size and rating.
If there is a problem on the road and
a fuse needs to be replaced, the
same amperage fuse can be
borrowed. Choose some feature of
the vehicle that is not needed to use
and replace it as soon as possible.
10-35

Advertisement

Table of Contents
loading

Table of Contents