Chevrolet Impala 2014 Owner's Manual page 185

While the USB source is active, use
the icons on the screen to operate
USB function:
(Seek Previous/Fast
Reverse)
(Seek Next/Fast Forward)
/ (Play/Pause)
Z
(Shuffle)
For information on how to use the
screen icons, see Playing an Audio
CD previously in this section.
USB Menu
Press the MENU knob to display the
USB menu and the following may
display:
Browse: Select to display the files
and folders on the USB device.
Tone Settings: Select to adjust
Bass, Midrange, Treble, Balance,
Fade, and EQ (Equalizer). See
Tone Settings under Playing an
Audio CD.
Auto Volume: If equipped, see
Playing an Audio CD.
EQ (Equalizer) Settings:
If equipped, this feature adjusts the
pre-defined EQ Modes. See EQ
(Equalizer) Settings in AM-FM
Radio on page 7-7.
DSP Modes: If equipped, this
feature adjusts the DSP Modes.
See DSP Modes in AM-FM Radio
on page 7-7.
Playing from an iPod
This feature supports the following
iPod models:
®
iPod nano (1st, 2nd, 3rd, and
4th generation)
iPod with video (5.0 and 5.5
generation).
®
iPod classic (6th generation)
®
iPod touch (1st and 2nd
generation)
Infotainment System
There may be problems with
operation and function in the
following situations:
When connecting an iPod on
which a more recent version of
the firmware is installed than is
supported by the infotainment
system.
When connecting an iPod on
which firmware from other
providers is installed.
®
To connect and control an iPod:
1. Connect one end of the standard
iPod USB cable to the iPod's
dock connector.
2. Connect the other end to the
USB port in the center console.
3. Press the MEDIA button to
select the source.
iPod music information displays on
the radio s display and begins
playing through the vehicle s audio
system.
7-15