Speedometer; Odometer; Trip Odometer - Chevrolet Impala 2014 Owner's Manual

5-12 Instruments and Controls
Units: Press while Units is
displayed to enter the Units menu.
Choose English or metric units by
pressing while the desired item is
highlighted.
Info Pages: Press while Info
Pages is displayed to enter the Info
Pages menu and select the items to
be displayed in the Info App. See
Driver Information Center (DIC) on
page 5-27.
Speed Warning: The Speed
Warning display allows the driver to
set a speed that they do not want to
exceed. To set the Speed Warning,
press when Speed Warning is
displayed. Press or
the value. Press to set the speed.
Once the speed is set, this feature
can be turned off by pressing
while viewing this page. If the
selected speed limit is exceeded, a
pop-up warning is displayed with a
chime.
Compass: In certain vehicles the
compass setting will allow for
manually setting the compass. The
user can set the zone and calibrate
the compass. This setting page is
only available on vehicles that are
equipped with Remote Compass
Module.
Jump Start: The Jump Start
display is used to perform an
on-board jump start for eAssist
vehicles. See Jump Starting
(On-board with eAssist Only) in the
Index.

Speedometer

The speedometer shows the
vehicle's speed in either kilometers
to adjust
per hour (km/h) or miles per
hour (mph).

Odometer

The odometer shows how far the
vehicle has been driven, in either
kilometers or miles.
This vehicle has a tamper-resistant
odometer. If the vehicle needs a
new cluster installed, the new
odometer is set to the mileage of
the old odometer. If this is not
possible, it is set at zero and a label
is put on the driver door to show the
old mileage reading.

Trip Odometer

The trip odometer can show how far
the vehicle has been driven since
the trip odometer was last reset.
The trip odometer is accessed and
reset through the Driver Information
Center (DIC). See Driver
Information Center (DIC) on
page 5-27.