Toshiba 26HL84 Service Manual page 24

11. Removing the chassis frame
1) Remove the back cover. (Refer to Item 1.)
2) Remove the speakers. (Refer to Item 2.)
3) Remove the top shield bracket. (Refer to Item 3.)
4) Remove Power Module unit. (Refer to Item 4.)
5) Remove the Scaler board. (Refer to Item 5.)
6) Remove the D-Rewrite board and bracket. (Refer to Item 6.)
7) Remove the back plate. (Refer to Item 7.)
8) Remove the TU/AOUT, AV2 and Signal boards. (Refer to Item 8.)
9) Remove the Front/AV board. (Refer to Item 9.)
10) Remove the Power SW and LED/RMT boards. (Refer to Item 10.)
11) Remove 2 screws (PP 3x6), then remove the cord holder.
12) Remove 4 screws (PP 3x6), then remove 2 fan bracket holders.
13) Remove 4 screws (PP 3x20), then remove the 2 DC fans.
14) Remove 10 screws (PBI 4x12) and 8screws (PP 4x10), then remove the chassis frame.
PP 4x10
PP 3x6
Chassis frame
PP 3x6
PP 3x20
PBI 4x12
– 24 –
Fan bracket holder
PP 3x6
DC Fan
PP 3x20
PP 4x10
PBI 4x12