6.
Removing the D-Rewrite board
1) Remove the back cover. (Refer to Item 1.)
2) Remove the top shield bracket. (Refer to Item 3.)
3) Remove the Scaler board. (Refer to Item 5.)
4) Remove 2 screws, then remove the D-Rewrite board.
5) Disconnect the 2 wire harnesses and 1 FFC on the D-Rewrite board.
6) Remove 2 screws, then remove the digital unit bracket.
7) Remove 2 screws, then remove the scaler unit bracket.
PP 3x6
D-REWRITE board
STP 3x8
Scaler unit bracket
– 19 –
STP 3x8
Wire harnesses
FFC
Digital unit bracket
STP 3x8