Toshiba 26HL84 Service Manual page 18

5. Removing the Scaler board
1) Remove the back cover. (Refer to Item 1.)
2) Remove the top shield bracket. (Refer to Item 3.)
3) Remove 4 screws (STP3x6) and 2 screws (STP3x5), then remove the top shield RM.
4) Disconnect the 8 wire harnesses and 2 FFC from the Scaler board.
5) Remove 4 screws (STP3x5), then remove the Scaler board and bottom shield RM.
FFC
Wire harnesses
SCALER
board
DVI MODULE
BIDT2
3 x10 BZ
Nuts
Wire harnesses
SCALER board
Wire harnesses
ANT
– 18 –
STP 3x6
Top shield RM
Bottom
shield RM
STP 3x5
STP 3x6
STP 3x5