Toshiba 26HL84 Service Manual page 22

9. Removing the Front /AV board
1) Remove the back cover. (Refer to Item 1.)
2) Remove 1 screw (BIDT2 3x10 BZ).
3) Remove 2 screws (PP 3x6), then remove the front AV panel.
4) Remove 1 screw (BIDT2 3x10 BZ) and 1 screw (PP 3x6), then remove the rear AV panel.
5) Disconnect the 2 wire harnesses and 1 FFC from the Front/AV board.
6) Remove 2 screws (PP 3x6), then remove the wire holder and Front/AV board.
Wire harnesses
PP 3x6
FFC
Wire holder
PP 3x6
PP 3x6
Front AV panel
Rear AV panel
BIDT2 3x10 BZ
FRONT/AV board
– 22 –