7.
Removing the back terminal plate, back bottom plate and back R plate
1) Remove the back cover. (Refer to Item 1.)
2) Remove the top shield bracket. (Refer to Item 3.)
3) Remove the Scaler board. (Refer to Item 5.)
4) Remove the D-Rewrite board. (Refer to Item 6.)
5) Remove 5 screws (BIDT 2 3x10BZ) and 2 screws, then remove the back terminal plate.
6) Remove 2 screws (STP 3x8), 2 hexagon nuts and 1 toothed washer, then remove the back bottom plate.
7) Remove 5 screws (STP 3x8), then remove the back R plate.
STP 3x8
Back plate R
STP 3x8
Back terminal plate
Back bottom plate
STP 3x8
STP 3x8
BIDT2 3x10 BZ
– 20 –