Toshiba 26HL84 Service Manual page 17

4. Removing the Power Module unit
1) Remove the back cover. (Refer to Item 1.)
2) Disconnect the power cord from the connector.
3) Remove the 3 wire harnesses from the 3 wire clampers on the plate back R.
4) Disconnect the 8 wire harnesses from the 8 connectors on the Power Module unit.
5) Remove 7 screws, then remove the Power Module unit.
Wire Harnesses
Wire Harnesses
POWER MODULE UNIT
Power cord
STP 3x8
Plate Back R
Wire clampers
– 17 –