Gateway 3-Bay mBTX Pro User Manual page 147

10
Pull the release latch down to the Unlock position on the 5.25-inch bay, then slide the
component forward and out of the bay.
11
Lift the 5.25-inch bay from the chassis to remove it.
12
Disconnect the power and data cables from the system board, noting their locations and
orientation. (You will reconnect the cables after you install the new board.)
13
Remove the four screws that secure the power supply to the computer.
Screw
Screw
14
Slide the power supply away from the back of the computer, then remove it.
www.gateway.com
Screw
Screw
141