Singer futura ce-100 Instruction Manual page 76

If embroidering onto material which is smaller than the
hoop size, or when embroidering close to the edge of
material, attach the stabilizer as illustrated.
WHEN EMBROIDERING ALONG THE EDGE OF
MATERIAL SUCH AS A HANDKERCHIEF
WHEN EMBROIDERING A NARROW PIECE OF
FABRIC SUCH AS RIBBON TAPE
Use two layers of interfacing if required by the material.
Always use a layer of stabilizer which is bigger than the hoop
being used. (The stabilizer will not work properly unless it is
clamped by the hoop together with the material being
embroidered.).
Stabilizer can usually be obtained from a fabric store.
Stabilizer is available in several different types, from thin to
thick. Purchase whichever type suits your embroidering needs.
It is generally recommended that the weight of the stabilizer be
similar to that of the fabric.
74
Embroidery surface at material edge
Surface de broderie sur le bord du tissu
Superficie de bordado en el borde del material
Stabilizer
(Adhesive surface facing)
Entoilage
(face à la surface adhésive)
Estabilizador
(cara de la superficie adhesiva)
Hoop inner frame
Cadre intérieur du cerceau
Interior del marco del aro
Stabilizer
Entoilage
Estabilizador
Stabilizer
Entoilage
Estabilizador
Hoop inner frame
Cadre intérieur du cerceau
Interior del marco del aro
Ribbon tape
Ruban
Cinta