Ricoh Printer Operating Instructions Manual page 54

Preparing the Machine
❖ When connected with the network
• DeskTopBinder Lite must be installed, or the Standard TCP/IP port must
be used.
• Under Windows 2000/XP, Windows Server 2003, [Enable bidirectional sup-
1
port] must be selected, and [Enable printer pooling] must not be selected on
the [Ports] tab with the RPCS printer driver.
If the Standard TCP/IP port is not being used, one of the following conditions
must be met in addition to the two above:
• The SmartDeviceMonitor for Client port and the TCP/IP protocol must be
used.
• The standard TCP/IP port must be used without changing the default port
name (for Windows 2000 / XP and Windows Server 2003).
• Microsoft TCP/IP print IP address must be specified for use (for Windows
NT 4.0).
❖ When connected with USB
The machine must be connected to the computer's USB port using the USB in-
terface cable.
The computer must support bidirectional communication.
Note
❒ Install SmartDeviceMonitor for Client from the supplied CD-ROM.
46