Setting Wallpaper; Setting Contrast - Motorola MTP830 S Feature User Manual

Feature User Guide
Procedure Steps
From the home screen, press MENU key.
1
2 Select Setup → Display → Backlight.
Select one of the following:
3
• Auto — Backlight is triggered by turning on the radio, by pressing any key on device or on the
accessory that is connected to it. Also charging or getting signal from the services like: Call-Out
message,RUA request, DGNA and TX timeout during priority call are going to turn on the backlight.
• Semi Auto — Backlight is turning on when you are switching on the radio, pressing assigned button
to the backlight feature, or charging.
• Disabled — Backlight feature is disabled. Your display is always dimmed.
• On — Backlight is always on.
Setting the backlight intensity level by pressing the BACKLIGHT key changes the LED, keypad
backlight, and EMERGENCY button backlight intensity.

5.8.8.5 Setting Wallpaper

When and where to use:
To change the look of the idle screen.
Procedure Steps
1 From the home screen, press MENU key.
2 Select Setup → Display → Wallpaper.
Select one of the following:
3
• On — To activate this feature.
• Off — To deactivate this feature.

5.8.8.6 Setting Contrast

When and where to use:
This feature sets the contract of the display to enhanced visibility of the interface.
5-44 -