Display
Setting Time and Date on the Display
2.5 Status Icons
Status icons appear when your radio is engaged in certain activities or when you have activated certain features.
Table 2-6 Status Icons
Icon
Trunked Mode Operation
Direct Mode Operation
-
Description
In Service (Signal Strength) — Allows you to check signal strength. More bars indicate a
stronger signal.
No Service
Migration — Displayed when your radio is registered to the foreign network.
Broadcast Call — Displayed when the radio is in the Broadcast Call.
Scan — Indicates talkgroup scanning is activated in the radio.
Priority Scan — Indicates that priority scanning is activated in the radio.
Data Connected — Displayed when the Packet Data feature is activated and the external
device sets up data connection with the radio.
Data Transmit/Receive — Displayed when the Packet Data feature is activated and the
external device sets up data connection with the radio.
• No number — standby data session.
• Number 1, 2, 3, or 4 — indicates active data session with 25%, 50%, 75%, or
100% bandwidth.
Direct Mode Call – Displayed during a Direct Mode call; more bars indicate a stronger
signal.
Direct Mode — Displayed when the radio is in Direct Mode.
Repeater Mode — Displayed when the radio is switched to work as a repeater in Repeater
Mode.
DMO Gateway Communication Mode — Indicates that gateway is selected. The icon
has the following states:
• Solid — while the radio is synchronized with the gateway.
• Blinking — while the radio is not synchronized or during attachment.
• No icon — during a radio to radio and repeater call.
2.5 Status Icons
2-9