Using Phone/Pabx Speed Dial; Ms-Isdn; Dtmf Overdial; Short Number Dial - Motorola MTP830 S Feature User Manual

This feature is available only in TMO Mode.

6.4.1 Using Phone/PABX Speed Dial

Procedure Steps
1 From the home screen, enter the predefined Phone/PABX speed dial number and # key.
Press SEND key.
2

6.5 MS-ISDN

This feature adds to the radio ISDN number. You can choose between MS-ISDN and ISSI to address the call, send the
message or pre-defined templates. It works for both simplex and duplex calls, based on the assigned ISDN number.

6.6 DTMF Overdial

This feature allows you to communicate with an automated answering device (for example, the voice mail or
answering machine) during an on-going private, phone or PABX call.
While in an on-going private, phone or PABX call, press the DTMF keys (0-9, *, #). When pressed, the DTMF key
sounds a tone and the entered digit is displayed on the screen.

6.7 Short Number Dial

This feature allows you to dial part of the full number of the person you wish to call. Your radio automatically
completes the number.
Example:
Your radio number is 4282564.
1. Dial 564 (instead of 4282564, the full number).
2. To place the call, press the PTT button or the SEND key.

6.8 WAP

Wireless Application Protocol (WAP) is a standard for application layer network communications in a wireless
communication environment such as TETRA network. The protocol is used to access the mobile web from a
radio through a WAP browser.
This is a selling feature.
-
6.4.1 Using Phone/PABX Speed Dial
6-3