Services Tab - Ricoh GlobalScan Administrator's Manual

Services Tab
The Services tab displayed below shows GlobalScan Services that are configurable on
the profile level, e.g., RightFax and OCR. The Configure button opens a Services
Configuration Page that allows entry of required parameters.
Note: System-wide Services can be configured through the Manage Services screen (see Step 5:
Manage Services, if necessary).
To open the Services Configuration Screen, click the
A
B
C
D
A. Pre-Render - If the optional RightFax Plug-in is installed, it is possible to fax
documents (via the RightFax Server) from the MFD control panel. The GlobalScan
System Administrator can enter/edit RightFax settings for each profile, so that
GlobalScan can connect to different RightFax Servers, if desired, i.e., one
RightFax Server can be identified for use with the MFD in the marketing
department and another for the shipping department, etc.
Note: The RightFax settings are established on the profile level only and cannot be overridden on
the project level.
To establish profile server settings for RightFax, proceed as follows:
1. Click Configure
Display reads...
GlobalScan
Administrator's Guide
Services tab.
Services Configuration
Screen
GlobalScan Version
indicates GlobalScan
SKD version used to
build the Service
"
About" button opens a
screen that provides a
description, author,
internal Service
version and copyright
version
TM
Ver. 2.0
43