Receiver; Communications Mode; Band; Table 2 - Communication Modes - Yaesu FT-450 User Manual

Hf/50 mhz transceiver
Hide thumbs Also See for FT-450:
Table of Contents

Advertisement

YAESU HF/50 mHz Transceiver FT-450 User's Manual
4) Turning the power on while holding the "MODE▼" button will display the current software
version. You must then turn the power off and then on to resume normal operation.
3

Receiver

The transceiver provides both a multi-band sensitive receiver and transmitter. Most of the
controls have to do with the operation of the receiver section. However, Mode, Band, and VFO
apply to the transmitter section as well.
3.1

Communications Mode

The FT-450 transceiver is designed to communicate using Lower Side Band
(LSB), Upper Side Band (USB), Continuous Wave (CW, i.e. Morse code),
Data (DATA), Amplitude Modulation (AM), or Frequency Modulation (FM).
Pressing either the "MODE▼" or "MODE▲" will step through the available
modes in the forward or reverse direction respectively. These buttons are found to the right of the
"DSP/SEL" knob. Any unwanted modes may be turned off in adaptation using the MENU functions
described later.
Most user's will not need all of the communication modes shown in Table 2. When you get to the section
on adaptation, you will find that you can configure the system to skip any modes that are not needed.
3.2

Band

Step through the bands using "BAND▲" and "BAND▼" buttons on either
side of the "MAIN" dial. Only those bands enabled (via the menu
command) will be selected. The available bands are shown in Table 1
above. Any unwanted bands may be turned off in adaptation using the
MENU functions described later.
BAND
GEN
1.8 MHz
3.5 MHz
7.0 MHz
10 MHz
14 MHz
MODE
DESCRIPTION
USB
Upper side band
LSB
Lower side band
CW
Continuous Wave
AM
Amplitude Modulation
FM
Frequency Modulation
DATA
Radio teletype, Packet
Table 2 – Communication Modes
RANGE
30 KHz ~ 33 MHz
30 KHz ~ 33 MHz
30 KHz ~ 33 MHz
30 KHz ~ 33 MHz
30 KHz ~ 33 MHz
30 KHz ~ 33 MHz
- 4 -
AMATEUR RADIO BAND
none (stores non-ham fqys )
1.8 MHz ~ 2.0 MHz
3.5 MHz ~ 4.0 MHz
7.0 MHz ~ 7.3 MHz
10.1 MHz ~ 10.15 MHz
14 MHz ~ 14.35 MHz

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ft-450at

Table of Contents