Advertisement
Stop the stopwatch
You can see the total elapsed time in the lower
line of the display
Press the left button shortly.
The stopwatch stops.
2. Press the left button briefly agaln.
The stopwatch continues running.
may
You
need this function for example if you
have to stop your exercise momentarily because
of traffic lights etc.
S t o p h e a r t r a t e m e a s u r e m e n t ,
recall training information and
return to Time of Dav
Press and hold the left button
for
second to stop heart
rate measurement and to
II training informa-
upper iine of the dispiay
appears on the lower line of
the display
Press the left button
briefly to return to display
showing Time of Day.
Time of Day appears in
the display
10
Your last training information is in the memory of
the
Edge NV until the next time you measure
Polar
heart rate. To review this last training information,
in the display showing
Time
button three times. After this, to return to Time of
Day, press the left button once. Note: When you
start heart rate measurement again your previous
training information will be replaced by the new
one. You cannot recall the replaced information
later.
NOTE: To return to display showing Time of Day
in the setting procedure, press both
at any point
buttons simultaneously.
Begin with display showing
Time of Day.
Press the left button to
enter Target Zone setting.
The Upper Limit reading
appears fiashing in the
The upper bat indicat-
ing the Upper Limit, ap-
pears in the upper left
corner of the display
Press the right button to select the correct
value for the Upper Limit.
of Day, press the left
Advertisement
