Step
9.
Routing of inbound calls to the QuesCom 400 gateway from the GSM network is created by
clicking on the ADD RECORD button on the main Service screen shown in Step 6. On the
Service screen, configure the following as shown below.
• Origin Type – select radio button "Device".
• Origin – select "Q400(SmartAD)"
• Called Prefix Number – enter "*"
• Call Type – select "GSM Incoming"
• Service type – select "VoIP"
• Destination Type – select radio button "Foreign GK"
• Device – select "CM"
The other parameters can be left with default values. Click on Save.
10. The inbound call route pattern added in Step 9 can be displayed on the main Service screen by
clicking on Services
HJP; Reviewed:
SPOC 9/14/2006
Service.
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
Description
20 of 27
QuescomACM_H323