Verification Steps - Avaya QuesCom 400 Application Notes

6. Verification Steps

This section provides the tests that can be performed to verify proper configuration of Avaya
Communication Manager and QuesCom 400.
Step
1. From the SAT, enter the command status signaling-group s, where s is the number of a
signaling group configured in Section
From the SAT, enter the command status trunk-group t, where t is the number of a trunk
group configured in Section 3.3, and verify that the Service States of all trunks are "in-
service/idle" or "in-service/active".
2. Expand the Management Console tree by clicking on Q400(10.1.10.55)
GSM Device #0
colour green with IDLE.
HJP; Reviewed:
SPOC 9/14/2006
Trunks/Channels Monitoring. Ensure the Trunks configured are the
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
Description
3.3, and verify that the Group State is "in service".
SmartIADs Q400
24 of 27
QuescomACM_H323