Status Menu Error Codes - Epson WF-R8590 User Manual

LCD screen message
No dial tone detected.
Combination of IP address and
subnet mask is invalid.
Recovery mode
Parent topic:
Related references
Where to Get Help
Related tasks
Checking for Software Updates
Selecting the Line Type
Connecting a Telephone or Answering Machine
Removing and Installing Ink Packs
Related topics
Wi-Fi or Wired Networking

Status Menu Error Codes

If a job does not complete successfully, you can check the error code. Press the Status button, then
select Job History and locate the incomplete job. Select the job to display the error code and additional
information.
Code
001
101
Condition/solution
Make sure the phone cable is connected correctly and the
phone line works. If you connected the product to a PBX (Private
Branch Exchange) phone line or Terminal Adapter, change the
Line Type setting to PBX. If you still cannot send a fax, turn off
the Dial Tone Detection setting. (Turning off the Dial Tone
Detection setting may cause the product to drop the first digit of
a fax number.)
There is a problem with the network connection to your product.
Set up your product on the network again.
An error has occurred during firmware updating. Connect your
product using a USB cable and try downloading the Firmware
Update from the Epson support site. If you still need help,
contact Epson for support.
Solving Problems
Condition/solution
The product was turned off by a power failure.
Memory is full. Reduce the size of the print job.
352