Set Date/Time - AT&T CRL32202 Complete User's Manual

Telephone settings
Handset settings

Set date/time

The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are
set automatically with each incoming call. The year must be set so that the
day of the week can be calculated from the caller ID information. You can
also turn off the date and time settings of the caller ID service and set the
date and time manually (see Use caller ID to automatically set date and
time on page 19).
After a power failure or handset registration, the system prompts you to set
the date and time.
To set the date and time manually:
1. When the handset is in idle mode, press MENU/
to enter the main menu.
2. Use q or
CID
press /SELECT.
MENU
3. Use q or
CID
the number using the dialing keys.
4. Use q or
CID
number using the dialing keys.
5. Use or
q
CID
number using the dialing keys, then press
to move on to set the time.
6. Use or
q
CID
number using the dialing keys.
7. Use or
q
CID
the number using the dialing keys.
8. Use or
q
CID
Then, press
MENU
screen returns to the previous menu.
NOTE: If the clock is not set when a message is recorded, the system announces, "Time and
day not set," before it plays the message.
p to scroll to >Set date/time and then
DIR
p to choose the month (MM), or enter
DIR
p to choose the day (DD), or enter the
DIR
to choose the year (YY), or enter the
p
DIR
to choose the hour (HH), or enter the
p
DIR
to choose the minute (MM), or enter
p
DIR
to choose AM or PM, or press 2 for AM or 7 for PM.
p
DIR
/SELECT to confirm. There is a confirmation tone and the
SELECT
/SELECT
MENU
13
Ringers
>Set date/time
SET DATE
MM/DD/YY
SET TIME
HH:MM --