Set Date/Time - AT&T EL52265 User Manual

Telephone settings
Handset settings

set date/time

The answering system announces the day of the week and time of each
message received prior to playing it. If you subscribe to caller ID service,
the day, month and time are set automatically with each incoming call (see
About caller ID on page 40). However, the year must be set so that the day
of the week can be calculated from the caller ID information.
Follow the steps, as mentioned below, to set the month, date, year and time.
1. Press
main menu.
2. Press or
then press
3. Press or
using the dialing keys (0-9).
4. Press or
using the dialing keys (0-9).
5. Press or
2-digit number (00-99) using the dialing keys (0-9),
then press
6. Press or
using the dialing keys (0-9).
7. Press or
enter the 2-digit number (00-59) using the dialing keys (0-9).
8. Press or
note: If the date and time is not set when the message is recorded, the system announces
"Time and date not set" before it plays the message.
in idle mode to enter the
to scroll to set date/time, and
.
to select the month, then press
, or enter the 2-digit number (01-12)
to select the day, then press
, or enter the 2-digit number (01-31)
to select the year, or enter the
.
to select the hour, then press
, or enter the 2-digit number (00-23)
to select the minute, then press
to choose AM or pM. Press
17
Set date/time
ECO
Date: MM/DD/YY
ECO
Time: HH:MM - -
ECO
, or
to save.