Set Date/Time - AT&T EL52103 User Manual

Telephone settings
Handset settings

Set date/time

The answering system announces the day of the week and time of each
message received prior to playing it. If you subscribe to caller ID service,
the day, month and time are set automatically with each incoming call (see
About caller ID on page 41). However, the year must be set so that the day
of the week can be calculated from the caller ID information.
Follow the steps, as mentioned below, to set the month, date, year and time.
Press mEnU/
1.
menu.
2. Press or
CID
/SElECT.
press
mEnU
3. Press or
CID
/SElECT, or enter the 2-digit number (01-12)
mEnU
using the dialing keys (0-9).
4. Press or
CID
/SElECT, or enter the 2-digit number (01-31)
mEnU
using the dialing keys (0-9).
5. Press or
CID
2-digit number (00-99) using the dialing keys (0-9),
then press
mEnU
6. Press or
CID
/SElECT, or enter the 2-digit number (00-23)
mEnU
using the dialing keys (0-9).
7. Press or
CID
the 2-digit number (00-59) using the dialing keys (0-9).
8. Press
or
CID
note: If the date and time is not set when the message is recorded, the system announces
"Time and date not set" before it plays the message.
in idle mode to enter the main
SElECT
to scroll to Set date/time, and then
DIR
to select the month, then press
DIR
to select the day, then press
DIR
to select the year, or enter the
DIR
/SElECT.
to select the hour, then press
DIR
to select the minute, then press
DIR
to choose Am or Pm. Press
DIR mEnU
16
Set date/time
ECO
Date: MM/DD/YY
ECO
Time: HH:MM - -
ECO
/SElECT, or enter
mEnU
/SElECT to save.